Creality K2 Plus Combo 3D Printer

Description

K2 Plus Combo: Epic Leap of Color & Size
 Intelligent CFS: CFSx4 delivering up to 16 colors
 350x350x350mm: More space for creativity
 Step-servo Motor System: 30000mm/s² acceleration and quiet
 Actively Heated Chamber: Supporting engineering filaments
 Dual AI Cameras: Smart to adjust flow rate and alert failures
Sturdy “Matrix” Frame: Die-cast tech for superb rigidity

Intelligent Management of Multiple Filaments
Auto Identification&Mapping | Auto Run-out/Tangle Detection
Auto Filament Switch & Relay | Moisture-proof Filament Storage
Spring-loaded Batten Bar | Cardboard Spool Compatibility

16 Colors Level Up Your Creativity
The CFS comes with a connection hub on the back. By hooking up as many as four CFS units together, you are able to print in the splendor of 16 colors. Saves the need for extra painting afterward.

Powerfully Built “Matrix” Frame
A Sturdy, King-sized Beast

Dual Z-axis Assisted by 4 Linear Rods
Extremely steady while carrying the print bed up and down. Virtually no layer shift.

5mm Thick Aluminum Alloy Heatbed
Holding exceptionally well against deformation and vibration.

Incredibly Quiet While Printing Hard
The working noise of K2 Plus is only 45dB, which is credited to the virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.

Blazing Speed, a New Record
For a large-format machine, 600mm/s is pretty fast, but that’s not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s².

Active Belt Tensioning
Timing belts may get loose over time, leading to poor print quality and accuracy.
On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of marhually. Now, belt tensioning is a thing you can forget about.

Automated Run-out & Sensor Filament Cutter
The steel-bladed cutter features a magnetic retraction mechanism for precise filament positioning and minimal waste, with an indicator to replace the filament when only one inch remains.

Next-gen Direct Drive Extruder
So Many Features Neatly Packed

40mm³/s High-flow Hotend
Powered by an 80W heater, the flow rate of ABS at 280℃ can reach 40mm³/s, 66% higher than the previous design.

Two Auxiliary Fans Set the Style Right Off
The part cooling airflow is nearly doubled with two auxiliary cooling fans installed on both sides of the chamber, ensuring model shapes and details are set before any stringing or warping occurs.

Chamber AI Camera Keeps a Keen Watch
K2 Plus uses an Al camera on the chamber side to watch over spaghetti failure, foreign objects, idling, etc. It will alert you when an error occurs. It also supports real-time monitoring and time-lapse filming.

Toolhead Al Camera
Tunes the Flow Rate

Ingenious Anti-tilt Auto Leveling
K2 Plus features dual independently motorized Z-axes for automatic tilt reduction, strain gauge-based auto-leveling compensation, and a pro-level first layer capability that ensures a smooth and neat initial layer without manual intervention.

Smarter Software for a Seamless Workflow
The latest Creality OS will unlock the full power of your 3D printer. It features smart multi-filament management and allows for fire-tuning in expert mode or with root access. FLUIDD WebUI is also supported for your convenience.

Learn More>